- Product description
Features and benefits:
LOCTITE 510 is a high temperature resistant anaerobic sealant that cures in the absence of air between closely spaced metal surfaces.
Typical applications include the sealing of rigid flange surfaces on gearboxes and engine housings. It ensures immediate sealing at low pressure. The product increases the torque capacity of assembled flanges.
- For metal flanges
- High temperature resistant flange gasket
- Adapts to irregularities and scratches on the flange surface up to 0.25 mm
- Increases the torque capacity of mounted flanges
Technical data: Technical data
Technical Data:
Size: 50 ml
Chemical base: Methacrylate
Colour: pink
Operating temperature: -55 to 200 °C
Fluorescent: No
Viscosity in mPa*s: 40000-140000
Shear strength in N/mm: 5
Max. Joint in mm: 0.25
Handling strength behind, steel: 25 min.
Handling strength behind, aluminium: 45 min.
Strength: medium
Note: for machined, rigid metal flanges - high temperature resistance
Safety instructions and warnings
Safety instructions for LOCTITE® 510 50ml, pink - high temperature resistant anaerobic sealant
1. always read the label and product information before use
2 The product may cause skin irritation and serious eye damage. Avoid contact with skin and eyes.
3. wear protective gloves and goggles when handling the product.
4. work in well ventilated areas.
5. keep the product away from children and store in a safe place.
6. if swallowed, seek medical advice immediately and show this container or label.
7. keep out of reach of children.
8. in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
9. in case of contact with skin, wash immediately with plenty of soap and water.
10. do not allow the product to enter the environment. Obtain special instructions/ consult safety data sheet.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html