LOCTITE® 480 500g, black - toughened, fast curing instant adhesive
LOCTITE® 480 500g, black - toughened, fast curing instant adhesive

LOCTITE® 480 500g, black - toughened, fast curing instant adhesive

Article no.: 117028A
Manufacturer: Loctite

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Features and benefits:

LOCTITE 480 is an instant adhesive designed for bonding difficult-to-bond materials that require uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive that offers increased flexibility and peel strength as well as improved impact resistance.

The product enables rapid bonding of a wide range of materials including metals, plastics and rubber. LOCTITE 480 has good resistance in humid environments.

- Ideal for bonding metal to metal, rubber or magnets
- Good resistance in humid environments
- For applications where impact resistance is required or where shock or peel loads occur

Technical data: Technical data

Technical data:

Size: 500 g

Application method, recommended: Dosing system, manual

Applications, recommended: Bonding of tight-fitting parts

Colour: Black

Fixing time, steel: 90.0 sec.

Gap filling: 0.18 mm

Main features, recommended: Hardened

Operating temperature: -40.0 - 100.0 °C (-40.0 - 212.0 °F )

Shear strength, mild steel (grit blasted): 26.0 N/mm² (3800.0 psi )

Viscosity: 200.0 mPa-s (cP)

Safety instructions and warnings

Safety Instructions for LOCTITE® 480 500g, black - viscous, fast curing instant adhesive:

1. read and understand all safety, operating and application instructions carefully before use.

2. use only in accordance with the instructions and restrictions provided.

3. keep away from children and avoid contact with skin and eyes.

4 Wear suitable protective equipment such as gloves and goggles before use.

5 Do not inhale the adhesive and ensure adequate ventilation of the work area.

6. if swallowed or inhaled, seek medical advice immediately and have the packaging or label ready.

7. do not use near naked flames or smoke.

8. keep the adhesive out of reach of heat and direct sunlight.

9. follow local regulations for handling and disposal.

10. carry out a compatibility test before use on sensitive surfaces.

Manufacturer Contact information

Contact Manufacturer

Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf

https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.