- Product description
Features and benefits:
LOCTITE 460 instant adhesive is a transparent and colourless liquid that provides fast bonding for a wide range of materials including metals, elastomers and plastics.
LOCTITE 460 is designed for applications where vapour control is difficult. It is also well suited for bonding porous or absorbent materials.
- Low odour for applications where vapour control is important
- Low bloom for cosmetic applications
- Low viscosity
- Well suited for porous substrates
- Fast bonding (5 - 20 sec., depending on substrate)
Technical Data
Technical data:
Size: 20 g
Application method, recommended: Dosing system, manual
Applications, recommended: Bonding of close-fitting parts
Colour: Ultra clear
Fixing time, steel: 20.0 sec.
Gap filling: 0.12 mm
Main features, recommended: Low efflorescence, low odour, surface insensitive, low viscosity
Operating temperature: -40.0 - 80.0 °C (-40.0 - 175.0 °F )
Shear strength, structural steel (grit blasted): 21.0 N/mm² (3050.0 psi )
Viscosity: 40.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 460 20g, transparent - instant adhesive is a low viscosity ethyl cyanoacrylate product
1 Read and understand all safety and operating instructions before use.
2. keep the adhesive out of the reach of children.
3. avoid contact with skin and eyes. In case of contact, rinse thoroughly with water and seek medical attention if necessary.
4. do not inhale the adhesive. Ensure adequate ventilation.
5 Wash hands thoroughly before opening the packaging.
6 Only use the adhesive in well-ventilated areas.
7. do not use near naked flames or sources of ignition.
8. do not swallow the adhesive. If swallowed, seek medical attention immediately.
9. use the adhesive only according to the manufacturer's instructions.
10. wear protective gloves when using LOCTITE® 460 20g, transparent - instant adhesive is a low viscosity ethyl cyanoacrylate product.
11. wear safety goggles when using LOCTITE® 460 20g, transparent - instant adhesive is a low viscosity ethyl cyanoacrylate product.
12 Store the adhesive at room temperature and protect from direct sunlight.
13 Do not mix with other chemicals unless specifically recommended.
14. if the adhesive gets into the eyes, rinse them immediately under running water for at least 15 minutes and seek medical attention.
15 Wear suitable protective clothing when handling the adhesive.
Manufacturer Contact information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html