- Product description
Features and benefits:
LOCTITE 435 is a colourless, toughened, ethyl-based instant adhesive. It has a bonding time of 10 - 20 seconds. It has high impact and shock resistance, high peel strength and is suitable for bonding plastics, rubber, metals, magnets, porous and absorbent substrates and acidic surfaces. Good resistance in humid environments.
- Hardened, clear
- Ideal for bonding small to medium-sized parts
- Well suited for porous and/or acidic surfaces
- Well suited for metals, magnets, rubber and plastics
- Temperature resistance up to 120°C
- Solvent-free
- Fixing time of 10 - 20 seconds
Technical data
Technical data:
Size: 20 g
Application method, recommended: Dispenser system, Manual
Applications, recommended: Bonding of tight-fitting parts
Colour: Clear
Fixing time, steel: 30.0 - 45.0 sec.
Gap filling: 0.15 mm
Main features, recommended: Flexible, impact resistant, surface insensitive, hardened, low viscosity
Operating temperature: -40.0 - 100.0 °C (-40.0 - 212.0 °F )
Shear strength, structural steel (grit blasted): 18.5 N/mm² (2700.0 psi )
Viscosity: 200.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 435 20g, colourless - toughening ethyl-based instant adhesive:
1. read and follow all safety warnings and manufacturer's instructions before use.
2. keep the adhesive out of the reach of children.
3. do not ingest the adhesive. If swallowed, seek medical attention immediately.
4. avoid contact with eyes. In case of contact with eyes, rinse thoroughly with water and consult a doctor.
5. in case of contact with skin, wash immediately with plenty of soap and water. If symptoms persist, consult a doctor.
6. use the adhesive only in well ventilated areas. Avoid inhalation of vapours.
7. protect the adhesive from heat and naked flames. Do not smoke during use.
8. exercise caution when using adhesive near electrical equipment or ignition sources.
9. store the adhesive in the original container and keep it tightly closed.
10. observe local regulations when disposing of the adhesive.
Manufacturer Contact information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html