- Product description
Features and benefits:
Loctite 414 is an instant adhesive for normal bonding. Enables fast bonding of a wide range of materials, including metals, plastics and elastomers. Bonds in a thin joint and in seconds. Loctite 414 is resistant to petrol and engine oils.
Technical Data
Technical data:
Size: 20 g
Viscosity: 90 [mPa.s]
Maximum gap: 0.10 [mm]
Temperature resistance: - 40 to + 80 [°C]
Material bonded: steel, aluminium, neoprene, rubber, nitrile, ABS, PVC, polycarbonate, phenol
Handling strength in shear [N/mm2]:
On steel: 18 - 26
On ABS for: 4 - 6
On polycarbonate for: 3 - 5
Fusing speed [s]:
On steel for: 15 - 30
On ABS for: 2 - 10
On polycarbonate for: 15 - 50
Properties:
Technology: Cyanoacrylate
Appearance: transparent, clear to straw-coloured liquid
Components: one-component
Viscosity: low viscosity
Curing: by moisture
Application: bonding
Safety instructions and warnings
Safety instructions for LOCTITE® 414 20g, colourless - Ethyl based instant adhesive:
- Keep away from children.
- If swallowed, seek medical advice immediately and show this container or label.
- Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- In case of contact with skin, wash immediately with plenty of soap and water.
- If you feel unwell, seek medical advice/attention.
- Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- Use in well ventilated areas. Avoid inhalation of vapours, aerosols.
- Do not use near sources of ignition - no smoking.
- Use only in well ventilated areas. Avoid inhalation of vapours, aerosols.
- Keep container tightly closed.
Manufacturer Contact information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html