LOCTITE® 406 20g, clear - low viscosity, fast curing instant adhesive
LOCTITE® 406 20g, clear - low viscosity, fast curing instant adhesive

LOCTITE® 406 20g, clear - low viscosity, fast curing instant adhesive

Article no.: 117035A
Manufacturer: Loctite

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Features and benefits:

LOCTITE 406 is an instant adhesive specially developed for the rapid bonding of plastics and rubbers. This product offers an exceptionally low viscosity. In combination with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.

- Fast bonding of plastics and rubbers, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion to difficult-to-bond substrates
- Very low viscosity

Technical Data

Technical data:

Size: 20 g

Application method: Dispenser system, Manual

Applications: Bonding of elastomers, Bonding of plastics

Colour: Clear

Curing type: Moisture cure

Fixing time, steel: 30.0 sec.

Gap filling: 0.12 mm

Main features: Fast curing, low viscosity

Operating temperature: -40.0 - 120.0 °C (40.0 - 250.0 °F )

Physical form: Liquid

Recommended for use with: Elastomer, plastic, rubber

Shear strength, mild steel (grit blasted): 15.5 N/mm² (2250.0 psi )

Viscosity, resin: 20.0 mPa-s (cP)

Safety instructions and warnings

Safety Instructions for LOCTITE® 406 20g, clear - low viscosity, fast curing instant adhesive

1. read and follow all safety precautions and manufacturer's instructions before use.

2. superglue may cause skin and eye irritation. Avoid contact with skin and eyes.

3. in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

4. in case of contact with skin, wash immediately with plenty of soap and water.

5. wear suitable protective gloves and goggles before use.

6. use the superglue in a well-ventilated area to avoid inhalation of vapours.

7 Do not ingest. If swallowed, seek medical attention immediately.

8 Keep out of the reach of children.

9. do not store or use flammable materials near the superglue.

10. the instant adhesive should be stored at room temperature.

11. protect from frost. Do not expose to temperatures below -40 °C.

12. dispose of the packaging properly after use.

Manufacturer Contact information

Manufacturer Contact

Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf

https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.