- Product description
Features and benefits:
LOCTITE 406 is an instant adhesive specially developed for fast bonding of plastics and rubbers. This product offers an exceptionally low viscosity. In combination with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Fast bonding of plastics and rubbers, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion to difficult-to-bond substrates
- Very low viscosity
Technical Data
Technical data:
Size: 50 g
Application method: Dosing system, Manual
Applications: Bonding of elastomers, Bonding of plastics
Colour: Clear
Curing type: Moisture curing
Fixing time, steel: 30.0 sec.
Gap filling: 0.12 mm
Main features: Fast curing, low viscosity
Operating temperature: -40.0 - 120.0 °C (40.0 - 250.0 °F )
Physical form: Liquid
Recommended for use with: Elastomer, plastic, rubber
Shear strength, mild steel (grit blasted): 15.5 N/mm² (2250.0 psi )
Viscosity, resin: 20.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 406 50g, clear - low viscosity, fast curing instant adhesive
- Observe the general safety precautions for handling chemicals.
- Wear suitable protective equipment such as gloves and safety goggles.
- Avoid contact with skin and eyes. In the event of contact with the eyes, rinse thoroughly with water and seek medical advice.
- Avoid inhalation of vapours or spray mist. Work in well ventilated areas or wear a respirator.
- Keep the product out of the reach of children and pets.
- Use the adhesive only for its intended purpose and in accordance with the manufacturer's instructions.
- Store the product in a cool, dry place, away from heat and open flames.
- Dispose of the product in accordance with local regulations.
- Read the product's safety data sheet carefully before use.
Manufacturer contact information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html