- Product description
Features and benefits:
LOCTITE 406 is an instant adhesive specially developed for the rapid bonding of plastics and rubber. This product offers an exceptionally low viscosity. In combination with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Fast bonding of plastics and rubbers, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion to difficult-to-bond substrates
- Very low viscosity
Technical Data
Technical data:
Size: 500 g
Application method: Dosing system, Manual
Applications: Bonding of elastomers, Bonding of plastics
Colour: Clear
Curing type: Moisture curing
Fixing time, steel: 30.0 sec.
Gap filling: 0.12 mm
Main features: Fast curing, low viscosity
Operating temperature: -40.0 - 120.0 °C (40.0 - 250.0 °F )
Physical form: Liquid
Recommended for use with: Elastomer, plastic, rubber
Shear strength, mild steel (grit blasted): 15.5 N/mm² (2250.0 psi )
Viscosity, resin: 20.0 mPa-s (cP)
Safety instructions and warnings
Safety Information for LOCTITE® 406 500g, clear - low viscosity, fast curing instant adhesive:
- Causes serious eye irritation.
- May cause respiratory irritation.
- May cause an allergic skin reaction.
- Toxic to aquatic organisms with long lasting effects.
- Keep container tightly closed.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- IF ON SKIN: Wash with plenty of soap and water.
- If skin irritation or rash occurs: Get medical advice/attention.
- Dispose of contents/container in accordance with national regulations.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html