- Product description
Features and benefits:
LOCTITE 406 is an instant adhesive specially developed for the rapid bonding of plastics and rubber. This product offers an exceptionally low viscosity. In combination with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Fast bonding of plastics and rubbers, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion to difficult-to-bond substrates
- Very low viscosity
Technical Data
Technical data:
Size: 20 g
Application method: Dosing system, Manual
Applications: Bonding of elastomers, Bonding of plastics
Colour: Clear
Curing type: Moisture curing
Fixing time, steel: 30.0 sec.
Gap filling: 0.12 mm
Main features: Fast curing, low viscosity
Operating temperature: -40.0 - 120.0 °C (40.0 - 250.0 °F )
Physical form: Liquid
Recommended for use with: Elastomer, plastic, rubber
Shear strength, mild steel (grit blasted): 15.5 N/mm² (2250.0 psi )
Viscosity, resin: 20.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 406 20g, low viscosity, fast curing instant adhesive
- Read and understand all safety instructions and warnings before use.
- Use only in well ventilated areas.
- Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water.
- Do not inhale. In case of accidental inhalation, move to fresh air and get medical attention if necessary.
- Keep away from children.
- The product must not get into the hands of untrained personnel.
- Read and follow the manufacturer's instructions before opening the container.
- Ensure correct storage and handling to avoid accidents.
- Do not use near electrical appliances or naked flames.
- The product must not be stored near food or drink.
- The product must not be used if it is damaged or leaking.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html