- Product description
Features and benefits:
LOCTITE 401 is a fast curing instant adhesive designed for bonding difficult-to-bond materials that require uniform stress distribution and high tensile and/or shear strength. The product enables rapid bonding of a wide range of materials including metals, plastics and elastomers.
LOCTITE 401 is also suitable for bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.
- Universal instant adhesive
- Very high strength for tight-fitting parts
- Perfect for all quick repairs and all types of small emergency repairs
- Bonds a variety of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics and most plastics)
Technical specifications
Technical data:
Size: 500 g
Application method: Dispensing system, Manual
Applications: Bonding tight-fitting parts, repairing
Colour: Clear
Curing type: Moisture-curing
Fixing time, steel: 5.0 sec.
Gap filling: 0.15 mm
Main features: Very fast curing, general purpose, high strength, low viscosity
Operating temperature: -40.0 - 120.0 °C (-40.0 - 250.0 °F )
Physical form: Liquid
Recommended for use with: Elastomer, metal, plastic, porous surfaces
Shear strength, mild steel (grit blasted): 20.0 N/mm² (2900.0 psi )
Viscosity: 100.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 401 500g, clear - fast curing instant adhesive
1 Read safety data sheet before use.
2 Use only in well ventilated areas.
3. avoid skin contact. In case of contact with skin, rinse thoroughly with water.
4. avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
5 Keep away from children.
6 Do not swallow. If swallowed, seek medical advice immediately.
7 Do not use near open flames or hot surfaces.
8 Keep away from sources of ignition - do not smoke during use.
9 Do not freeze the adhesive.
10. protect from sunlight.
Operating instructions for LOCTITE® 401 500g, clear - fast curing instant adhesive
1. ensure that the surfaces to be bonded are clean, dry and free from grease prior to application
2. apply the adhesive thinly and evenly.
3. join the parts to be joined immediately and press together lightly.
4. allow the adhesive joint to cure sufficiently before it is loaded.
5 If necessary, an activator can be used to shorten the curing time.
6. close the bottle tightly after use to prevent the adhesive from drying out.
Please note that this is a general summary of the safety and operating instructions. For detailed information, please read the safety data sheet and the manufacturer's instructions.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html