- Product description
Features and benefits:
LOCTITE 290 is a liquid, medium to high strength threadlocker designed for locking and sealing threaded joints. Due to its low viscosity and capillary action, the product flows between the screwed-in threads and eliminates the need for disassembly prior to application.
The product hardens when trapped between close fitting metal surfaces in the absence of air and prevents loosening and leakage due to shock and vibration. The product can also fill pores in welds, castings and powdered metal parts.
- Ideal for securing pre-assembled fasteners, e.g. instrument fasteners, electrical plugs and grub screws
- Only works on metal
- Requires heat for disassembly
Technical data
Technical data:
Size: 50 ml
Application method: After application
Application temperature: -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Applications: For pre-assembled fasteners, porosity sealing, thread locking
Breakaway torque, M10 steel nuts/bolts: 10.0 N-m (90.0 in./lb. )
Colour: Green
Cure type: Anaerobic cure
Fastening time: 20.0 min.
Main features: Disassembly by heat, fluorescent, medium to high strength, low viscosity, wicking/penetration grade
Physical form: Liquid
Specified torque, M10 steel nuts/bolts: 29.0 N-m (260.0 in./lb. )
Recommended for use with: Brass, steel, stainless steel
Viscosity, speed 20 RPM: 40.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 290 50ml, medium to high strength anaerobic adhesive:
1. read all instructions on the label and in the Instructions for Use before use.
2 Use only in well ventilated areas.
3. wear eye protection.
4. in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
5. avoid skin contact. In case of contact with skin, wash thoroughly with soap and water. 6.
6 Do not inhale. If inhaled, remove to fresh air and keep at rest.
7. keep away from children and keep out of reach of children.
8. if swallowed, seek medical advice immediately and show this container or label.
9. protect from sunlight. Do not expose to temperatures above 50°C.
10. dispose of the product in accordance with local regulations.
11. for further information on use, storage and disposal, please refer to the manufacturer's instructions for use.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html