- Product description
Features and benefits:
LOCTITE 290 is a liquid, medium to high strength threadlocker designed for locking and sealing threaded joints. Due to its low viscosity and capillary action, the product flows between threads and eliminates the need for disassembly prior to application.
The product hardens when trapped between close fitting metal surfaces in the absence of air and prevents loosening and leakage due to shock and vibration. The product can also fill pores in welds, castings and powdered metal parts.
- Ideal for securing pre-assembled fasteners, e.g. instrument fasteners, electrical plugs and grub screws
- Only works on metal
- Requires heat for disassembly
Technical data
Technical data:
Size: 250 ml
Application method: After application
Application temperature: -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Applications: For pre-assembled fasteners, porosity sealing, thread locking
Breakaway torque, M10 steel nuts/bolts: 10.0 N-m (90.0 in./lb. )
Colour: Green
Cure type: Anaerobic cure
Fastening time: 20.0 min.
Main features: Disassembly by heat, fluorescent, medium to high strength, low viscosity, wicking/penetration grade
Physical form: Liquid
Specified torque, M10 steel nuts/bolts: 29.0 N-m (260.0 in./lb. )
Recommended for use with: Brass, steel, stainless steel
Viscosity, speed 20 RPM: 40.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 290 250ml, medium to high strength anaerobic adhesive
1 Read all instructions and safety data sheets carefully before use.
2. wear appropriate protective equipment when handling the adhesive, including safety glasses and gloves.
3. keep the adhesive away from heat, open flames and sources of sparks.
4. use the adhesive only in well ventilated areas.
5. keep the adhesive out of the reach of children.
6. do not get into eyes. In case of contact with eyes, rinse thoroughly with water and seek medical advice.
7. if swallowed, seek medical advice immediately and show the container or label.
8. in case of contact with skin, wash immediately with soap and water.
9. store the adhesive in a cool, dry place away from direct sunlight.
10. do not use on damaged or damp surfaces.
11 Do not use the adhesive near flammable materials.
12. test compatibility with the materials to be bonded before use.
13. do not inhale the adhesive. If inhaled, move to fresh air and seek medical attention if symptoms persist.
14. observe local rules and regulations when disposing of the adhesive.
15. when applying the adhesive to surfaces, ensure that they are clean, dry and free from oil and grease.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html