- Product description
Features and benefits:
LOCTITE 270 is a high strength threadlocker for maximum effectiveness in locking and sealing screws, nuts and bolts to prevent loosening due to vibration. The product is used to permanently secure assemblies that must not come loose.
It is effective on all metals, including passive substrates such as stainless steel, aluminium and coated surfaces. It has been proven to be tolerant to low levels of contamination from industrial oils, e.g. engine oils, anti-corrosion oils and cutting fluids. Can be dismantled by heating to 300°C.
- High-strength general threadlocker for maximum effectiveness
- Prevents loosening on vibrating assemblies, e.g. pumps, gearboxes or presses
- Proven to be tolerant to low levels of contamination from industrial oils, e.g. engine oils, anti-corrosion oils and cutting fluids
- Works on all metals, including passive substrates (e.g. stainless steel, aluminium, coated surfaces)
- Enables disassembly with hand tools
- Can be disassembled by heating to 300°C
Technical data
Technical data:
Size: 50 ml
Regulatory approvals: NSF P1 Reg No: 123006
Application temperature: -55.0 - 180.0 °C (-65.0 - 360.0 °F )
Breakaway torque, M10 steel nuts/bolts: 33.0 N-m (290.0 in./lb. )
Colour: Green
Fastening time: 10.0 min.
Main features: General purpose, high strength
Specified torque, M10 steel nuts/bolts: 33.0 N-m (290.0 in./lb. )
Recommended for use with: Brass, steel, stainless steel
Viscosity, 20 rpm: 500.0 mPa-s (cP)
Safety instructions and warnings
Safety instructions for LOCTITE® 270 10ml, green - Threadlocking adhesive, high strength:
1. read labelling before use.
2 Keep out of the reach of children.
3. keep away from heat, sparks, open flames, hot surfaces and other ignition sources. Do not smoke.
4 Do not get in eyes, on skin or on clothing.
5. in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
6. in case of contact with skin, wash immediately with plenty of soap and water.
7. do not induce vomiting if swallowed. Seek medical advice immediately and show this container or label.
8. keep container tightly closed.
9. use only outdoors or in a well-ventilated area.
10. protect from sunlight.
11 Do not spray on an open flame or other ignition source.
12. use only for the intended purpose.
13. dispose of contents/container in accordance with local/regional/national/international regulations.
Manufacturer Contact Information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html