- Product description
Features and benefits:
LOCTITE 262 is a red, general purpose, medium to high strength, thixotropic, methacrylate based adhesive. The bonding time for steel is 15 minutes, for brass 8 minutes and for stainless steel 180 minutes. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can withstand light contamination from industrial oils. Suitable for all metal fixings.
- Resistant to vibration
- Fluorescent to enable quality control and inspection
- Tolerates light contamination from industrial oils
- Suitable for all metal fasteners
- Medium/high strength, universally applicable
- Thixotropic/low viscosity
Technical data: Technical data
Technical data:
Size: 250 ml
Agency approvals: NSF
Chemical base: Methacrylate
Colour: Red
Reaction time: 8.0 - 180.0 min.
Main properties: Thixotropy
Recommended for use with: Brass, steel, stainless steel
Viscosity, Brookfield - RVT, 25.0 °C spindle 3, speed 20 rpm, helipath: 1200.0 - 2400.0 mPa-s (cP)
Safety instructions and warnings
Safety instructions for LOCTITE® 262 250ml, red - medium/high strength thixotropic methacrylate based threadlocking adhesive
1. read and follow all manufacturer's instructions before using the product
2. wear appropriate protective equipment, including safety glasses and gloves, while handling the product.
3. avoid direct contact with skin and eyes. In case of contact, rinse thoroughly with water and seek medical attention if necessary.
4. store the product in a cool, dry place, away from heat and naked flames.
5. keep the product out of the reach of children and pets.
6. avoid inhaling vapours or mist from the product. Only use the product in well-ventilated areas.
7. use the product only in accordance with the manufacturer's instructions and for the intended purpose.
8. dispose of the product in accordance with local rules and regulations.
9. if the product is swallowed, do not induce vomiting, but seek medical advice immediately and show the packaging or the label.
10. observe all other safety and operating instructions of the manufacturer.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html