- Product description
Features and benefits:
LOCTITE 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE 243 works on all metals, including passive substrates such as stainless steel, aluminium and coated surfaces. It is proven to be tolerant to low levels of contamination from industrial oils, e.g. engine oils, anti-corrosion oils and cutting fluids.
- Prevents loosening on vibrating assemblies, e.g. pumps, gearboxes or presses
- Works on all metals, including passive substrates (e.g. stainless steel, aluminium, coated surfaces)
- Proven to tolerate low levels of contamination from industrial oils, e.g. engine oils, anti-corrosion oils and cutting fluids
- Allows disassembly with hand tools for maintenance work
Technical data: Technical data
Technical data:
Size: 10 ml
Application method: Dispensing gun, Dispensing system, Manual
Application temperature: -55.0 - 180.0 °C (-65.0 - 360.0 °F )
Applications: Thread locking
Breakaway torque, M10 steel nuts/bolts: ~26.0 N-m (230.0 in./lb. )
Colour: Blue
Cure type: Anaerobic cure
Fastening time: 10.0 min.
Main features: Removable, fluorescent, universal application, oil compatible, primer-free, medium strength, thixotropic
Physical form: Liquid
Specified torque, M10 steel nuts/bolts: 5.0 N-m (40.0 in./lb. )
Recommended for use with: Metal, passive metal
Specific gravity, 23.0 °C: 1.08
Viscosity, speed 20 RPM: 2150.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 243 10ml, blue - medium strength adhesive for threaded joints:
1. read all safety instructions and operating instructions carefully before use.
2. use the adhesive only in accordance with the manufacturer's instructions.
3. keep the adhesive out of the reach of children.
4. do not ingest or inhale the adhesive.
5. do not get the adhesive in the eyes, on the skin or on clothing. In case of contact with eyes, rinse thoroughly with water and seek medical advice immediately.
6 Use the adhesive only in well-ventilated areas.
7. keep the adhesive away from heat, sparks or open flames.
8. protect the adhesive from frost.
9. do not use the adhesive near electrical appliances.
10. do not mix the adhesive with other chemicals unless specifically recommended by the manufacturer.
11. close the adhesive immediately after use and store it upright.
12. if you are unsure or have questions about the use of the adhesive, contact the manufacturer.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html