- Product description
Features and benefits:
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and grub screws. Well suited for low strength metals that could break during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant to low levels of contamination from industrial oils, e.g. engine oils, anti-corrosion oils and cutting fluids.
- Ideal for low-strength screw locking of set screws, countersunk screws and grub screws
- Prevents loosening on vibrating components, e.g. pumps, gearboxes or presses
- Particularly suitable for small thread sizes
- Enables disassembly with hand tools
Technical data
Technical data:
Size: 250 ml
Approvals of the authority: NSF P1 Reg No: 123002
Application method: Dispenser system, manual
Application temperature: -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Applications: Thread locking
Breakaway torque, M10 steel nuts/bolts: 6.0 N-m (50.0 in./lb. )
Colour: Purple
Cure type: Anaerobic cure
Fastening time: 20.0 min.
Main features: Removable, fluorescent, general purpose, no mixing required, low strength, thixotropic
Physical form: Liquid
Specified torque, M10 steel nuts/bolts: 4.0 N-m (35.0 in./lb. )
Recommended for use with: Metal, passive metal
Viscosity, speed 20 RPM: 1200.0 mPa-s (cP)
Safety instructions and warnings
Safety Information for LOCTITE® 222 250ml, violet - Low Strength Threadlocking Adhesive
1. product description:LOCTITE® 222 is a low strength threadlocker that is applied to bolts, nuts and studs to prevent them from loosening due to vibration. The product is purple in colour and is supplied in a 250ml bottle.
2. safety measures:The product must be handled in accordance with the applicable national and international regulations. It is important that the instructions and safety warnings are fully read and understood before using the product.
3. storage:LOCTITE® 222 should be stored in its original packaging in a cool, dry place. It should be protected from light and moisture.
4. disposal:The product should be disposed of in accordance with local regulations. It must not be released into the environment.
5. first aid:In case of eye contact, rinse thoroughly with water and seek medical advice. In case of skin contact, wash the affected area with plenty of soap and water. If the product is inhaled, remove to fresh air and keep calm. If swallowed, seek medical attention immediately.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html