- Product description
Features and benefits:
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and grub screws. Well suited for low strength metals that could break during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant to low levels of contamination from industrial oils, e.g. engine oils, anti-corrosion oils and cutting fluids.
- Ideal for low-strength screw locking of set screws, countersunk screws and grub screws
- Prevents loosening on vibrating components, e.g. pumps, gearboxes or presses
- Particularly suitable for small thread sizes
- Enables disassembly with hand tools
Technical data
Technical data
Size: 10 ml
Approvals of the authority: NSF P1 Reg No: 123002
Application method: Dispenser system, manual
Application temperature: -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Applications: Thread locking
Breakaway torque, M10 steel nuts/bolts: 6.0 N-m (50.0 in./lb. )
Colour: Purple
Cure type: Anaerobic cure
Fastening time: 20.0 min.
Main features: Removable, fluorescent, general purpose, no mixing required, low strength, thixotropic
Physical form: Liquid
Specified torque, M10 steel nuts/bolts: 4.0 N-m (35.0 in./lb. )
Recommended for use with: Metal, passive metal
Viscosity, speed 20 RPM: 1200.0 mPa-s (cP)
Safety instructions and warnings
Safety Information for LOCTITE® 222 10ml, violet - Low Strength Threadlocking Adhesive:
Hazard statements:
- May cause an allergic skin reaction. - Causes serious eye irritation. - May cause respiratory irritation. - Toxic to aquatic organisms, with long lasting effects.Preventive measures:
- Read and understand all safety instructions before use. - Wear protective gloves and eye protection. - In case of skin contact, wash thoroughly with soap and water. - In case of eye contact, rinse thoroughly with water and consult a doctor. - Do not inhale vapour/aerosol. - Avoid release to the environment.First aid measures:
- In case of skin irritation or rash: Get medical advice/attention. - In case of eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing. - If inhaled: Remove to fresh air and keep at rest in a position comfortable for breathing. - If swallowed: If you feel unwell, seek medical advice/attention.Disposal:
- Dispose of product and container in accordance with local/regional/national/international regulations. - Do not allow to enter drains.Further information:
- Further information on handling, storage and disposal can be found in the manufacturer's safety data sheet.Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html