- Product description
Features and benefits:
LOCTITE SI 5910 is a low strength silicone based sealant designed for use on flexible flanges with machined or moulded surfaces (metal or plastic).
It is suitable for gaps up to 1 mm and offers a cure volume (in 24 h) of 2.75 mm. Typical applications are stamped sheet metal covers (timing covers and oil pans).
Technical Data
Technical data:
LOCTITE SI 5910 is a low strength gasket product for flexible flanges with good resistance to oil and joint movement.
Reduces the migration of liquids after application
Can be supplied in cartridges, tubes or cans
Size: 300 ml
Colour: Black
Extrusion speed: 500.0 g/min.
Number of components: 1 part
Operating temperature: -55.0 - 200.0 °C (-65.0 - 400.0 °F )
Recommended for use with: Ceramics, glass, metal, plastic
Storage temperature: 8.0 - 21.0 °C
Adhesion-free time: 40.0 min.
Safety instructions and warnings
Safety instructions for LOCTITE® SI 5910 300ml, black - low strength, silicone based sealing product for flexible flanges:
1. keep away from children.
2. always read the label and product information before use.
3. use only in well ventilated areas.
4. avoid contact with eyes and skin. In case of contact, rinse immediately with plenty of water and seek medical advice. 5.
5 Do not swallow. If swallowed, seek medical advice immediately and show the label.
6 Store in a cool, dry and well-ventilated area.
7. protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
8. do not store near fire or other heat sources.
Manufacturer Contact Information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html