- Product description
Features and benefits:
LOCTITE SF 770 is a primer used to make polyolefins and other low energy surfaces suitable for bonding with LOCTITE® instant adhesives.
It is recommended only for difficult-to-bond substrates, which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. LOCTITE SF 770 is not recommended for assemblies where high peel strength is required.
- Improves the adhesion of instant adhesives to polyolefins and other low surface energy plastics.
- For difficult to bond plastics only.
- Fluoresces to enable quality control and inspection.
Technical Data
Technical data:
Size: 500 ml
Application method: Pre-applied
Colour: Ultra clear
Main features Adhesion: Improves adhesion
Main characteristics, Chemical Basis/Base Heptane (original formula); Isopropyl acetate (upgrade formula): Solvent based
Safety instructions and warnings
Safety precautions for LOCTITE® SF 770 500ml, ultra clear - Polyolefin primer for surface preparation
- Read the label and safety data sheets carefully before using the product.
- Avoid contact with skin, eyes and clothing. Wear suitable protective gloves, protective clothing and eye protection.
- Only use the product in well-ventilated areas.
- Keep the product away from heat, sparks, open flames and other sources of ignition.
- Only use the product in accordance with the instructions. Misuse can lead to injury or damage.
- Keep the product out of the reach of children and pets.
- Dispose of the product in accordance with local regulations.
Manufacturer contact information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html