- Product description
Features and benefits:
LOCTITE SF 770 is a primer used to make polyolefins and other low energy surfaces suitable for bonding with LOCTITE® instant adhesives.
It is recommended only for difficult-to-bond substrates, which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. LOCTITE SF 770 is not recommended for assemblies where high peel strength is required.
- Improves the adhesion of instant adhesives to polyolefins and other low surface energy plastics.
- For difficult to bond plastics only.
- Fluoresces to enable quality control and inspection.
Technical Data
Technical data:
Size: 10 g
Application method: Pre-applied
Colour: Ultra clear
Main features Adhesion: Improves adhesion
Main characteristics, Chemical base/base Heptane (original formula); Isopropyl acetate (upgrade formula): Solvent based
Safety instructions and warnings
Safety precautions for LOCTITE® SF 770 10g, ultra clear - Polyolefin primer for surface preparation
- The primer should only be used in well ventilated areas.
- It is important to wear protective gloves to avoid skin contact.
- If the product is swallowed, seek medical attention immediately.
- Avoid contact with eyes. If the product gets into the eyes, rinse them thoroughly with water and seek medical attention.
- The product should be kept out of the reach of children.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html