LOCTITE® SF 7240 90ml, blue-green - surface preparation activator
LOCTITE® SF 7240 90ml, blue-green - surface preparation activator

LOCTITE® SF 7240 90ml, blue-green - surface preparation activator

Article no.: 116964A
Manufacturer: Loctite

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Properties and advantages:

Loctite SF 7240 is a one-component activator characterised by low viscosity and easy application with a spray. It is primarily intended for anaerobic products such as adhesives and sealants, e.g. sealing compounds.

It is used for even faster and better curing without loss of strength and with reduced time for complete curing. The advantage is that it does not contain any aggressive or hazardous solvents and therefore enables safe application and general use. Loctite SF 7240 Activator can also be used when bonding large joints or at temperatures below 15 °C. The activator must also be applied to adhesives that you wish to use on otherwise non-reactive surfaces.

Technical data

Technical data:

Size: 90ml

For even faster and better curing without loss of strength

Must be applied to adhesives that you want to use on otherwise non-reactive surfaces

Safety instructions and warnings

Safety Instructions for LOCTITE® SF 7240 90ml, blue-green - Surface Preparation Activator

  • Read all safety instructions and warnings on the product label and in the product instructions carefully before use.
  • Wear suitable protective gloves and eye protection when handling the product to avoid skin or eye contact.
  • Avoid direct contact with skin and eyes. In case of contact with skin, wash immediately with plenty of soap and water. In case of eye contact, rinse immediately with plenty of water and seek medical advice.
  • Use the product only in well ventilated areas and avoid inhalation of vapours or sprays.
  • Flammable. The product must not come into contact with sparks, naked flames or hot surfaces.
  • Not suitable for consumption. Keep the product out of the reach of children and pets.
  • Store the product in a cool, dry area, away from direct sunlight and heat sources.
  • Dispose of the product and packaging in accordance with local regulations. Empty containers may still contain vapours and should therefore not be reused.
Manufacturer Contact Information

Contact Manufacturer

Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf

https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.