- Product description
Features and benefits:
LOCTITE EA 9466 is a two-component, yellowish epoxy adhesive for structural bonding that cures at room temperature and forms a tough bond line that provides high peel and shear strength.
It is formulated for applications that require long life and high bond strength. It is resistant to a wide range of chemicals and solvents and also acts as an excellent electrical insulator.
- Creates a tough, high strength bond
- Long open time
- Resistant to chemicals and solvents
- High peel and shear strength
- Excellent insulating properties
Technical Data
Technical data:
Size: 400ml
Reaction time: 180.0 min.
Mixing ratio, by volume: 2 : 1
Peel strength, steel (grit blasted): 8.0 N/mm
Mixed:
Colour, mixed: Off White
Service life, mixed: 60.0 min.
Resin:
Colour, Resin: White
Viscosity, Brookfield - RVT, resin 25.0 °C spindle 6, speed 20 rpm: 15000.0 - 50000.0 mPa-s (cP)
Hardener:
Colour, Hardener: White
Viscosity, Brookfield - RVT, hardener 25.0 °C spindle 5, speed 50 rpm: 25000.0 - 60000.0 mPa-s (cP)
Safety instructions and warnings
Safety Information for LOCTITE® EA 9466 400ml, yellow - 2-component multi-purpose epoxy adhesive for structural bonding, cured
1. hazard statements:
- Causes severe skin burns and eye damage.
- May cause allergic skin reactions.
- May cause respiratory irritation.
- May be fatal if swallowed and enters airways.
2. safety instructions:
- Read and follow all safety precautions and manufacturer's instructions before use.
- Wear protective gloves, protective clothing, eye protection and face protection.
- Do not breathe dust/fume/gas/mist/vapour/aerosol.
- In case of contact with skin (or hair): Remove all contaminated clothing immediately. Wash skin with water/shower.
- In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
- If swallowed: Rinse out mouth. DO NOT induce vomiting.
- Immediately call a POISON CENTER or doctor.
- Keep container tightly closed.
- Store in a well-ventilated place. Keep cool.
3. disposal instructions:
- Dispose of product residues and empty containers in accordance with local regulations.
Source: Manufacturer's website, manufacturer's instructions, manufacturer's safety instructions
Manufacturer contact information
Manufacturer contact information
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html