- Product description
Properties and advantages:
LOCTITE EA 9461 is a 2-component, grey, structural adhesive epoxy that cures at room temperature and provides a tough bond.
It is therefore ideal for bonding a variety of substrates including metals, motorised thermoplastics and thermoset laminates such as SMC. Due to its thixotropic properties, it is well suited for gap filling and offers both high peel and shear strength.
Technical Data
Technical data:
Size: 50 ml
Curing time: 240.0 min.
Mixing ratio, by volume: 1 : 1
Peel strength, structural steel (grit blasted): 10.0 N/mm
Mixed colour:
Colour, mixed: grey
Pot life, mixed 22.0 °C 100 g mass: 40.0 min.
Resin:
Colour, Resin: White
Viscosity, DIN 54443 resin shear rate 10 s?¹: 85980.0 mPa-s (cP)
Viscosity, DIN 54443 Resin shear rate 50 s?¹: 38570.0 mPa-s (cP)
Hardener:
Colour, hardener: Black
Viscosity, DIN 54443 Hardener Shear rate 10 s?¹: 59530.0 mPa-s (cP)
Viscosity, DIN 54443 Hardener shear rate 50 s?¹: 42860.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® EA 9461 50ml, 2-part, thixotropic, structurally bonding epoxy adhesive:
1. always read labelling and product information before use.
2 Keep away from children.
3 Wear eye protection.
4. in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
5. in case of contact with skin, wash immediately with plenty of soap and water.
6 Do not inhale.
7 Ensure adequate ventilation during use.
8. if swallowed, seek medical advice immediately and show this container or label.
9. keep away from heat, sparks, open flames and hot surfaces. Do not smoke.
10. keep container tightly closed.
11. improper handling or use may release harmful vapours.
12 In case of skin irritation or rash: Get medical advice/attention.
13. keep in a well-ventilated place.
14. dispose of contents/container in accordance with local/regional/national/international regulations.
15. further safety and operating instructions can be found in the manufacturer's instructions or on the manufacturer's website.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html