- Product description
Features and benefits:
LOCTITE EA 3471 is a 2-component, grey, non-yielding epoxy resin putty that is easy to apply and does not require heating or welding.
Typical applications include repairing non-structural defects in castings, building fixtures, sealing vessels, tanks and valves, replacing worn air seals and filling cavities. This product is typically used in applications with an operating range of -30 to +105°C.
- Cures to a metal-like surface
- Excellent adhesion to metal surfaces
- Adheres well to all metal substrates
- Does not sag or shrink
Technical data
Technical data:
Size: 500 g
Bonding time: 180.0 min.
Mixing ratio, by volume: 1 : 1
Shear strength: 20.0 N/mm²
Working time: 45.0 min.
Safety instructions and warnings
Safety instructions for LOCTITE® EA 3471 500g, grey - 2-part, steel-reinforced, non-sag epoxy repair adhesive:
1. ensure there is adequate ventilation before use.
2. wear protective gloves and goggles to avoid direct contact with the adhesive.
3 Do not inhale or swallow the adhesive.
4. do not get into eyes. In case of contact with eyes, rinse immediately with water and seek medical advice.
5. in case of contact with skin, wash off immediately with soap and water.
6. keep the adhesive out of the reach of children.
7. store the adhesive in a cool and dry place.
8. use only for the intended purpose.
9. in case of accident or if you feel unwell, seek medical advice immediately and show the packaging or the label.
10. for further information on safety measures, please refer to the manufacturer's instructions or other valid sources.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html