- Product description
Features and benefits:
LOCTITE AA 326 is a universal construction adhesive for fast curing and high shear strength. The 2-step acrylate is used, among other things, for magnet bonding in electric motors.
It has good adhesion to various ferrites, a curing time of less than 3 minutes and a high shear strength of 15 N/mm². It can be used at temperatures up to +120°C. Requires LOCTITE SF 7649 for activation.
- High shear strength of 15 N/mm²
- Fast installation time within minutes (< 3 min)
- Developed for bonding with surface permanent magnets (SPM)
- Medium viscosity (thixotropic) supports easy automation and slack behaviour
- Temperature resistance up to +120°C
- Curing mechanism: activator or heat
Technical data: Technical data
Technical Data:
Size: 250 ml
Colour: Amber, Yellow
FEA (Finite Element Analysis): Finite strain, viscoelastic
Clamping time: 3.0 min.
Main features: No mixing required
Shear strength: 15.0 N/mm²
Viscosity, Brookfield - RVT, @ 25.0 °C spindle 6, speed 20 rpm: 14000.0 - 22000.0 mPa-s (cP)
Viscosity, EN 12092 - MV, @ 25.0 °C shear rate 36 s?¹: 10000.0 - 20000.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® AA 326 250ml, yellow - general purpose construction adhesive for fast curing:
1. read and follow all safety and operating instructions before use.
2. use the adhesive only in accordance with the specified application instructions.
3. keep the adhesive out of the reach of children.
4. avoid contact with skin and eyes. In case of contact, rinse with water and seek medical advice.
5. ventilate well during processing and ensure adequate ventilation.
6 Do not inhale or swallow the adhesive.
7. use only in well ventilated areas.
8. wear protective gloves and goggles when working.
9. protect the adhesive from direct sunlight and heat.
10. do not use the adhesive near open flames or sources of ignition.
11. store the adhesive in a cool, dry place.
12. if swallowed, seek medical advice immediately and show the packaging or the label.
13. dispose of the adhesive in accordance with local regulations.
14. contact the manufacturer's instructions or the manufacturer in case of problems or uncertainties.
Manufacturer Contact information
Contact manufacturer
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html