- Product description
Features and benefits:
LOCTITE 641 is designed for bonding cylindrical valve parts, especially where disassembly is required for maintenance.
The product cures in the absence of air between close fitting metal surfaces and prevents loosening and leakage due to impact and vibration. Ideal for parts that need to be disassembled later, e.g. for fixing bearings on shafts and in housings.
- Ideal for parts that require frequent maintenance, e.g. for holding bearings on shafts and in housings
Technical data: Technical data
Technical data:
Size: 50 ml
Colour: Yellow
Application time: 20.0 min.
Gap filling: 0.15 mm
Key features: Medium strength
Operating temperature: -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Recommended for use with: Steel
Shear strength, steel: 12.0 N/mm² (1700.0 psi )
Viscosity: 600.0 mPa-s (cP)
Safety instructions and warnings
Safety instructions for LOCTITE® 641 50ml, yellow - for bonding cylindrical moulded parts
1. read and understand all safety and application instructions carefully before use.
2 The product should be used in well ventilated areas.
3. avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water.
4 Wear suitable protective gloves and goggles during use.
5 Do not ingest. If swallowed, seek medical advice immediately.
6 Keep away from children.
7. the product must not fall into the hands of unauthorised persons.
8. surfaces should be thoroughly cleaned and degreased before use.
9. the product should be protected from direct sunlight and stored at room temperature.
10. read and follow the instructions on the label and in the manufacturer's instructions.
11. observe local regulations when disposing of the product.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html