- Product description
Features and benefits:
LOCTITE 620 is a locking compound developed for the bonding of cylindrical fittings. The product cures in the absence of air between closely fitting metal surfaces and prevents loosening and leakage due to impact and vibration.
Typical applications include locating pins in radiator assemblies, sleeves in pump housings and bearings in automotive transmissions. Particularly suitable for applications where temperature resistance of up to 200°C is required.
- Ideal for locating pins in radiator assemblies, sleeves in pump housings and bearings in automotive transmissions
- High temperature resistance
- High viscosity
- Gap filling up to 0.25 mm
- DVGW approval (EN 751-1): NG-5146AR0622
Technical data: Technical data
Technical Data:
Size: 50 ml
Official approvals / certificates / specifications: DVGW (EN 751-1) NG-5146AR0622
Application method: Dispenser system, Manual
Applications: For high temperature applications, For slip fitted parts, Securing
Colour: Green
Curing type: Anaerobic curing
Curing time: 60.0 min.
Gap filling: 0.15 - 0.25 mm
Main features: Slow curing, gap filling, medium to high strength, high temperature, high viscosity
Number of components: 1 part
Operating temperature: -55.0 - 230.0 °C (-65.0 - 450.0 °F )
Physical form: Liquid
Recommended for use with: Steel
Shear strength, steel: 26.0 N/mm² (3800.0 psi )
Viscosity: 8000.0 mPa-s (cP)
Safety instructions and warnings
Safety information for LOCTITE® 620 50ml, green - high strength, high temperature resistant locking compound
Hazard warnings:
- Causes skin irritation.
- Causes serious eye irritation.
- May cause an allergic skin reaction.
- Harmful if inhaled.
- May be fatal if swallowed and enters airways.
- Toxic to aquatic organisms with long lasting effects.
Precautionary statements:
- Avoid release to the environment.
- Wear protective gloves / protective clothing / eye protection / face protection.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- IF ON SKIN: Wash with plenty of soap and water.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
- IF SWALLOWED: Call a poison control centre/doctor immediately.
- Store under lock and key.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html