- Product description
Features and benefits:
LOCTITE 620 is an adhesive compound developed for bonding cylindrical fittings. The product cures in the absence of air between closely fitting metal surfaces and prevents loosening and leakage due to impact and vibration.
Typical applications include locating pins in radiator assemblies, sleeves in pump housings and bearings in automotive transmissions. Particularly suitable for applications where temperature resistance of up to 200°C is required.
- Ideal for locating pins in radiator assemblies, sleeves in pump housings and bearings in automotive transmissions
- High temperature resistance
- High viscosity
- Gap filling up to 0.25 mm
- DVGW approval (EN 751-1): NG-5146AR0622
Technical data: Technical data
Technical data:
Size: 250 ml
Official approvals / certificates / specifications: DVGW (EN 751-1) NG-5146AR0622
Application method: Dispenser system, Manual
Applications: For high temperature applications, For slip fitted parts, Securing
Colour: Green
Cure type: Anaerobic cure
Curing time: 60.0 min.
Gap filling: 0.15 - 0.25 mm
Main features: Slow curing, gap filling, medium to high strength, high temperature, high viscosity
Number of components: 1 part
Operating temperature: -55.0 - 230.0 °C (-65.0 - 450.0 °F )
Physical form: Liquid
Recommended for use with: Steel
Shear strength, steel: 26.0 N/mm² (3800.0 psi )
Viscosity: 8000.0 mPa-s (cP)
Safety instructions and warnings
Safety Instructions for LOCTITE® 620 250ml, green - high strength, high temperature resistant locking compound
1. hazard statements:
- Causes serious eye irritation.
- May cause respiratory irritation.
- May cause an allergic skin reaction.
- May be fatal if swallowed and enters airways.
- Toxic to aquatic organisms with long lasting effects.
2. safety instructions:
- Wear protective gloves/protective clothing/eye protection/face protection.
- IF SWALLOWED: Immediately call a POISON CENTRE/doctor.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- Store under lock and key.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Further information can be found on the official manufacturer's website or in the manufacturer's instructions and safety information.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html