- Product description
Features and benefits:
LOCTITE 603 is a high strength locking compound. Developed for bonding cylindrical mating parts, especially for sintered bearings and also where consistently clean surfaces cannot be guaranteed.
The product hardens in the absence of air between closely fitting metal surfaces and prevents loosening and leakage due to shocks and vibrations. It has a high oil tolerance.
- High-strength locking compound
- Particularly suitable for sintered bearings
- High oil tolerance
Technical data
Technical data:
Size: 250 ml
Official approvals / certificates / specifications: NSF, WRAS
Colour: Green
Reaction time: 10.0 min.
Gap filling: 0.15 mm
Main features: Oil tolerant, low viscosity
Operating temperature: -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Recommended for use with: Steel
Shear strength, steel: 26.0 N/mm² (3770.0 psi )
Viscosity: 125.0 mPa-s (cP)
Safety instructions and warnings
Safety instructions for LOCTITE® 603 250ml, green - high strength locking compound
1 Read and understand all safety and operating instructions before use.
2 Use only as directed.
3. keep away from heat, sparks, open flames and other sources of ignition. Do not smoke.
4 Use only in well ventilated areas.
5. avoid skin contact. In case of contact with skin, wash immediately with plenty of soap and water.
6. avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
7. do not induce vomiting if swallowed. Seek medical advice immediately and show this container or label.
8. protect from direct sunlight.
9. keep out of the reach of children.
10 Do not dispose of in open water or drains.
11 Store at room temperature in a closed container.
12. do not mix with other chemicals unless specifically stated.
Manufacturer Contact Information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html