LOCTITE® 601 50ml, green - anaerobic, low viscosity, medium cure speed, dimethacrylate ester-based retaining compound

Features and benefits:

Loctite 601 is primarily intended for joining flush cylindrical components only where low viscosity is required. Loctite 601 is a fastener with a very low viscosity and at the same time for really small joints down to 0.1 mm. After application, Loctite 601 hardens in the joint between metal surfaces without allowing air to penetrate.

After curing, it prevents spontaneous loosening or breaking of the joint, which is usually caused by the influence of vibrations and impacts. Loctite 601 is also very temperature resistant and can withstand temperatures up to 150°C, which is useful wherever there is a lot of heat.

Technical Data

Technical data:

Size: 50 ml

Maximum joint: 0.1 mm

Operating temperature: -55 to + 150°C

Shear strength in N/mm2: > 15

Thixotropy: No

Viscosity in mPa*s: 150 - 150

Working strength after, steel: 25 minutes

Chemical base: Methacrylate

Colour: green

Remarks: high strength, low viscosity, small joints