- Product description
Features and benefits:
LOCTITE 577 is designed to secure and seal metal pipes and fittings and other threaded connections. The product provides an instant low pressure seal for metal pipes and fittings. It does not creep, shrink or tear.
It has excellent chemical and thermal resistance and offers less migration of liquid product after application.
- Excellent chemical resistance
- Instant low pressure seal
- Suitable for all metals
- Medium-strength, universally applicable thread sealant for sealing metal threads
- Secures the connection against vibration-induced loosening and other stresses
- Easy to process
- Hardens on active and inactive metals
Technical data: Technical data
Technical data:
Size: 250 ml
Approvals / certificates / specifications: DVGW, NSF, WRAS
Application method: Dispenser system, manual
Applications: Pipe seals, thread seals
Breakaway torque, steel M10: 33.0 N-m (295.0 in./lb. )
Colour: Yellow
Cure type: Anaerobic cure
Main features: Chemical resistant, Fluorescent, General purpose, Instant low pressure seal, Medium strength, Tolerance to surface contamination, High temperature, Thixotropy
Operating temperature: -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Physical form: Paste
Recommended for use with: Passive metal, conical
Viscosity, 20 rpm: 25000.0 mPa-s
Safety instructions and warnings
Safety instructions for LOCTITE® 577 250ml, yellow - medium strength, general purpose thread sealant
1. general safety instructions:
- Keep the product out of the reach of children.
- Avoid contact with skin and eyes.
- Wear suitable protective gloves and safety goggles when using the product.
- Ensure that the work area is well ventilated.
- Avoid inhalation of vapours or aerosols.
2 Storage and handling:
- Store the product in a cool, well-ventilated area.
- Keep the container tightly closed when not in use.
- Avoid contact with heat and direct sunlight.
3. instructions for use:
- Thoroughly clean the surfaces to be bonded.
- Apply the thread sealant evenly.
- Use only the recommended amount of product.
- Allow the product to cure sufficiently before loading the joint.
4 Disposal:
- Dispose of the product in accordance with local rules and regulations.
- Do not flush the product down the drain.
- Take empty containers to the recycling centre.
Manufacturer Contact Information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html