LOCTITE® 574 250ml, orange - seals close-fitting joints between rigid metal faces and flanges
LOCTITE® 574 250ml, orange - seals close-fitting joints between rigid metal faces and flanges

LOCTITE® 574 250ml, orange - seals close-fitting joints between rigid metal faces and flanges

Article no.: 117004A
Manufacturer: Loctite

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Features and benefits:

LOCTITE 574 seals close-fitting joints between rigid metal surfaces and flanges. The product cures when trapped between close fitting metal surfaces in the absence of air. It provides resistance to low pressures immediately after assembly.

It is typically used as a form-in-place gasket on rigid flanged joints. The nature of LOCTITE 574 reduces migration of the liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.

- Excellent water and glycol resistance
- Ideal for use on rigid metal parts, e.g. cast iron parts and pump housings
- High oil resistance

Technical data: Technical data

Technical data:

Size: 250 ml

Colour: Orange

Application time: 15.0 - 45.0 min.

Gap filling: 0.25 mm

Laboratory shear strength: 8.5 N/mm²

Recommended for use on: Aluminium, steel

Safety instructions and warnings

Safety instructions for LOCTITE® 574 250ml, orange - seals tight-fitting joints between rigid metal surfaces and flanges

1 Before using this product, we recommend that you read the manufacturer's safety data sheets and instructions.

2. always wear suitable protective equipment, such as safety goggles and gloves, when using LOCTITE® 574.

3. avoid direct contact with skin and eyes. If LOCTITE® 574 comes into contact with the skin or eyes, rinse the area thoroughly with water and seek medical attention if necessary.

4. use LOCTITE® 574 only in well ventilated areas to avoid inhalation of vapours. If vapours are inhaled, move to fresh air and seek medical attention if necessary.

5. keep LOCTITE® 574 out of the reach of children and pets.

6. store the product in its original packaging in a cool, dry place.

7. follow the manufacturer's instructions for application and drying time of LOCTITE® 574.

8. dispose of the product and its packaging in accordance with local rules and regulations.

Manufacturer Contact Information

Manufacturer Contact

Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf

https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.