- Product description
Features and benefits:
LOCTITE 574 seals close-fitting joints between rigid metal surfaces and flanges. The product cures when trapped between close fitting metal surfaces in the absence of air. It provides resistance to low pressures immediately after assembly.
It is typically used as a form-in-place gasket on rigid flange connections. The nature of LOCTITE 574 reduces the migration of the liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
- Excellent water and glycol resistance
- Ideal for use on rigid metal parts, e.g. cast iron parts and pump housings
- High oil resistance
Technical data: Technical data
Technical data:
Size: 50 ml
Colour: Orange
Application time: 15.0 - 45.0 min.
Gap filling: 0.25 mm
Laboratory shear strength: 8.5 N/mm²
Recommended for use on: Aluminium, steel
Safety instructions and warnings
Safety instructions for LOCTITE® 574 50ml, orange - seals tight joints between rigid metal surfaces and flanges
1 Read all safety instructions on the product label and in the manufacturer's instructions before use.
2 Use the product in well-ventilated areas and avoid direct contact with skin and eyes.
3. wear gloves and safety goggles when handling.
4. if the product is swallowed or inhaled, consult a doctor immediately and show the label or product packaging.
5 In case of skin contact, wash the affected area thoroughly with soap and water.
6. do not release into the environment. Dispose of the product properly.
7. keep out of the reach of children.
8 Use only for its intended purpose and do not expose to overheated surfaces.
9. clean all surfaces thoroughly and allow to dry before use
10. protect the product from frost and direct sunlight.
Manufacturer Contact Information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html