- Product description
- Media & Downloads
DINITROL 6050 Plus can be used by specialists onall substrates found in the vehicle sector.
The product offers good adhesion on standard sheet steel as well as on galvanised, hot-dip galvanised and sendzimir galvanised sheet steel.
It also adheres to primed and filled surfaces, 2K acrylic paints (matt sanded), glass-reinforced plastic components and hard polyurethane.
- Very good filling and standing properties
- Soft and fine
- Excellent adhesion
- Fewer pores and easy sanding
- Reduced sanding and reworking costs
- Increased processing speeds
DINITROL 6050 Plus has good filling properties and is very easy to sand.
Pre-treatment
Depending on the condition of the substrate, roughen it by sanding, remove dust, grease and rust and clean with suitable agents.
Application
The filler is carefully mixed with 2 ? 3% hardener paste and the ready-to-use filler is applied to the repair area.
The working time is approx. 5 ? 6 minutes, depending on temperature and hardener addition. The surface can be easily sanded after 20 ? 30 minutes.
Caution! This product is subject to the Chemicals Prohibition Ordinance.
Colour Beige
Base material Unsaturated polyester resins
Container size 2kg tin
Container type Tinplate can
Dangerous goods information - Note UN1866, Resin solution, 3, PG III, D/E LTD QTY