- Product description
SikaPower-415 P1 is a one-component, cold-applied, moisture or temperature pre-curing, heat-curing epoxy resin/polyurethane-based sealant. SikaPower-415 P1 is suitable for sealing seams and joints in metal shell construction, whereby the sealant is cured to a cross-linked elastomer by heat, for example in a cathodic dip-paint oven. Pre-curing can take place at room temperature via a surface reaction with atmospheric moisture or at elevated temperature.
SikaPower-415 P1 enables the sealing of seams (laser, coarse and fine seams) and joints in metal shell construction. After application, the sealant forms a thin skin on the surface under the influence of air humidity (approx. 50% rel. humidity) within approx. four hours, which protects against washing out. Bonding of oiled substrates (common corrosion protection, deep-drawing oils, approx. 2 g/m²) is possible due to oil absorption during hot curing.
Product features / benefits- 1-component- elastic- adhesion on oiled substrates- pre-curing by means of air humidity at room temperature- well wash-out resistant after pre-curing at room temperature- no additional equipment required for pre-curing- does not contain any solvents or PVC- suitable for sealing different metals e.g. steel, aluminium, galvanised steel etc.- powder or KTL coatable after pre-curing