Dometic Büttner MT LB2412-25 charging booster, 24 V/12 V, 25 A

Safety instructions for Dometic Büttner MT LB2412-25 charge booster, 24 V/12 V, 25 A

CAUTION: Read the following safety and operating instructions before installing and operating the charge booster. Observe them to avoid accidents or damage.

1. electrical safety:

• The charge booster may only be installed by qualified specialist personnel.
• Before installation, all electrical connections, fuses and cables must be checked for integrity and correct connection.
• Ensure that all live parts are de-energised before starting installation or maintenance.
• The power supply must be switched off when carrying out maintenance work or repairs on the charging booster.
• Only use the cables and connections recommended by the manufacturer.

2. environmental safety:

• Install the charge booster in a well-ventilated environment and ensure there is sufficient space around the device.
• Keep the charging booster away from water, moisture and other liquids.
• Ensure that the charging booster is protected from shocks and vibrations.

3. operating instructions:

• The charging booster is designed for operation with a 24 V or 12 V power supply. Do not use it with other voltages.
• Ensure that the connected battery has the correct voltage and capacity for the charge booster.
• Do not overcharge the battery. Observe the charging cycles and times recommended by the battery manufacturer.
• Monitor the charging process regularly and stop it if there are signs of overheating, smoke or other unusual occurrences.

4 Maintenance and cleaning:

• Do not carry out any repairs or maintenance work on the charging booster unless expressly recommended by the manufacturer.
• Keep the housing of the charging booster clean and free of dust and dirt.
• Do not use harsh cleaning agents or solvents to clean the device.

Always follow the manufacturer's instructions and safety instructions for the specific charge booster to ensure safe operation.