- Product description
- Output with mains voltage quality (pure sine wave)
- Compromise-free, trouble-free operation of all mains-powered devices, e.g. medical devices, radio, charging holders (mobile phones, radio devices, hand lamps, batteries etc.), laptop, PC, air conditioning, cool boxes, power tools (drills, angle grinders etc.), TV, SAT, TFT, microwave, fully automatic coffee machine, hair dryer, fan, lights, hoover, refrigerator etc.
- Control unit can be rotated 360° on the device and can also be placed anywhere in the vehicle as an external remote control (5m connection cable included)
- Switch-mode technology, compact, lightweight, robust and reliable, high overload capacity for short periods
- Low power consumption, selectable power-saving mode:
- Continuous operation
- Automatic standby with automatic search for switched-on consumers
- OFF - Automatic switch-off in the event of battery over/undervoltage, overload, overheating, etc.
- Power and temperature-controlled comfort cooling fan with infinitely variable speed control
Optional accessories:
- Mounting frame S for remote control (art. 2016)
- Control unit (Art. 2065)
- Fuse holder for strip fuse (Art. 2242)
- Extension set with 2nd control unit, Y-distributor, connection cables 5 m and 30 cm (Art. 2067)
Technical data
| Nominal battery voltage (DC) in [V] | 12 |
| Output voltage (AC) in [V] | 230 pure sine wave |
| Output frequency | 50 Hz quartz stabilised |
| Efficiency | > 93 % |
| CosPhi of the loads | everything allowed |
| Output power duration in [W] | 300 |
| Output power short / peak in [W] | 420 / 600 |
| Minimum battery capacity (recommended) in [Ah] | > 60 |
| Current consumption (DC) at rated power in [A] | 27,5 |
| Battery overvoltage max. [V] | 16 |
| Battery undervoltage min. in [V] | 10,5 |
| Self-consumption in [W] | 4 (switched on, without load) |
| Self-consumption in standby mode in [W] | 3 (without load) |
| Battery connection cable | 4 mm2, 1.2 m |
| Temperature range [°C] | -20 to +45 |
| Degree/class of protection | IP 21 |
| Dimensions (WxHxD) in [mm] - Dimensions incl. mounting flanges and connections | 139 x 74 x 332 |
| Weight in [g] | 1800 |
| Standards (CE) | EN 60335-1 |
| Ambient conditions, humidity: max. 95% room humidity, non-condensing | |
| Scope of delivery: 5 m connection cable for control panel, battery connection cable, mains cable, operating instructions |
Safety instructions and warnings
Safety instructions for Votronic MobilPOWER Inverter SMI 300 Sinus -NVS
1 The inverter may only be installed and commissioned by qualified personnel.
2. before the inverter is connected, it must be checked for damage.
3. the inverter may only be installed in dry and well-ventilated rooms.
4. the inverter must be protected from moisture and direct sunlight.
5 Only suitable and authorised batteries may be connected.
6. the inverter must be de-energised before opening.
7. only approved and suitable fuses may be used.
8. the inverter must be supervised during operation.
9. the inverter must not be overloaded.
10. the inverter must be de-energised before maintenance work.
Manufacturer contact information
Contact manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/