Votronic MobilPOWER Inverter SMI 1700 Sine ST-NVS

Output with mains voltage quality (pure sine wave)
Compromise-free and trouble-free operation of all mains-powered devices, e.g. medical devices, radio, charging holders (mobile phones, radio devices, hand lamps, batteries etc.), laptop, PC, air conditioning, cool boxes, power tools (drill, angle grinder etc.), TV, SAT, TFT, microwave, fully automatic coffee machine, hair dryer, fan, lights, hoover, refrigerator etc.
Control unit can be rotated 360° on the device and can also be placed anywhere in the vehicle as an external remote control (5m connection cable included)
Switch-mode technology, compact, lightweight, robust and reliable, high overload capacity for short periods
Low power consumption, selectable power-saving mode:
- Continuous operation
- Automatic standby with automatic search for switched-on consumers
- OFF
Automatic switch-off in the event of battery over/undervoltage, overload, overheating, etc.
Power and temperature-controlled comfort cooling fan with infinitely variable speed control

Accessories required:

High-current cable set red/black 35mm². Available in 1m length (Art. 2269) and 2m length (Art. 2273)

Optional accessories:

Mounting frame S for remote control (art. 2016)
Control unit (Art. 2065)
High-load fuse holder (art. 2251)
High current cable red 40 cm length with 25mm² (Art. 2262) or 35mm² (Art. 2263)
Extension set with 2nd control unit, Y-distributor, connection cables 5 m and 30 cm (Art. 2067)

Nominal battery voltage (DC) in [V]	12
Output voltage (AC) in [V]	230 pure sine wave
Output frequency	50 Hz quartz stabilised
Efficiency	> 93 %
CosPhi of the loads	everything allowed
Output power duration in [W]	1700
Output power short / peak in [W]	2100 / 3000
Minimum battery capacity (recommended) in [Ah]	> 150
Current consumption (DC) at rated power in [A]	165
Battery overvoltage max. [V]	16
Battery undervoltage min. in [V]	10,5
Self-consumption in [W]	10 (switched on, without load)
Self-consumption in standby mode in [W]	5 (without load)
Battery connection terminals in [^mm2]	2 x 50
Temperature range [°C]	-20 to +45
Degree/class of protection	IP 21
Dimensions (WxHxD) in [mm] - Dimensions incl. mounting flanges and connections	262 x 92 x 482
Weight in [g]	5200
Standards (CE)	EN 60335-1
Ambient conditions, humidity: max. 95% room humidity, non-condensing
Scope of delivery: 5 m connection cable for control panel, battery connection terminals, mains cable, operating instructions

Safety instructions and warnings

Safety instructions for Votronic MobilPOWER Inverter SMI 1700 Sinus ST-NVS

The inverter may only be installed and maintained by authorised persons.
Ensure that the inverter is protected from moisture, rain and snow.
Avoid operating the inverter in the vicinity of flammable gases or liquids.
Do not use the inverter in closed rooms without adequate ventilation.
Avoid operating the inverter without a load.
Ensure that all electrical connections are made correctly and safely.
Avoid operating the inverter with damaged cables or connections.
Avoid operating the inverter in the vicinity of children or pets.
Observe all local rules and regulations relating to the operation of the inverter.

Operating instructions for Votronic MobilPOWER Inverter SMI 1700 Sinus ST-NVS

Ensure that the inverter is sufficiently ventilated and does not overheat.
Do not overload the inverter by drawing more current from it than it can supply.
Only use the inverter with suitable batteries.
Avoid operating the inverter while the batteries are charging.
Avoid operating the inverter with sensitive electronic devices that require a stable and reliable power supply.
Ensure that the batteries are properly connected and maintained to ensure a long service life of the inverter.

Manufacturer contact information

Manufacturer Contact

VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach

https://www.votronic.de/kontakt/