- Product description
- Charging programmes no. 5, 6, 7, 8, 9 and 10 can be set for all battery types
- Automatic, fast and gentle full charge and charge retention of the vehicle battery in accordance with DIN 14679
- Trouble-free operation and co-supply of devices connected to the vehicle electrical system (e.g. charging trays)
- Charging plug is automatically disconnected if the battery is missing (to prevent short circuits and plug corrosion)
- Visual and acoustic warning in the event of battery and operating errors
- Outstanding charging technology
- Fully automatic continuous operation for constant operational readiness of the batteries
- Compensation of voltage losses on the charging cables for exact compliance with the charging voltages
- Variable installation position
- Electronics protected against moisture
- The charging voltages are free of peaks and regulated to prevent overcharging
- Automatic battery regeneration during long downtimes (twice a week)
- Intended for direct connection of the charging plug at the end of the cable
(e.g. charging plug 12V/24V Art. 2331 or C-plug Art. 2323) - Cable length approx. 1.2m, extendable to approx. 5m
- Oil and acid-resistant cable suitable for high mechanical stress and use in damp rooms
Optional accessories:
- Remote control S (Art. 2075)
- Remote operating display IP67 (Art. 2081)
- Charger State Monitor (Art. 2082)
- C-plug (Art. 2323)
- Charging plug (Art. 2331)
Technical data
| Charging power in [V]/[A] | 12 / 15 |
| Rated voltage (AC) in [V] | 230 |
| Operating voltage range (AC) in [V] | 190 - 265 (full charging capacity) |
| Power consumption (AC) in max. [W] | 270 |
| Sinusoidal power factor correction (CosPhi = 1) | Yes |
| Nominal battery voltage (DC) in [V] | 12 |
| Battery capacity in [Ah] | 60 - 160 |
| Charging current in [A] | 15 |
| Auxiliary charging output "S" in [A] | - |
| Charging characteristic | IU1oU2 |
| Voltage limitation for all charging types/programmes [V] | 15 |
| Voltage ripple in [mV] rms | < 40 |
| Number of charging outputs | 1 |
| Device installation position | any |
| Temperature range [°C] | -20 to +45 |
| Degree/class of protection | I / IP 21 |
| Dimensions (WxHxD) in [mm] - Dimensions incl. mounting flanges, without connections | 210 x 71 x 160 |
| Weight in [g] | 1250 |
| Standards (CE) | EN 60335-2-29 |
| Ambient conditions, humidity: max. 95% room humidity, non-condensing | |
| Scope of delivery: mains cable, spiral cable, operating instructions |
Safety instructions and warnings
Safety instructions for Votronic Automatic Charger VAC 1215 Station with spiral cable 5m:
- Before using the device, please read the operating instructions carefully.
- Only use the device in accordance with the manufacturer's instructions.
- Ensure that the device is properly connected before using it.
- Do not use the device near water or other liquids.
- Ensure that the appliance does not overheat and is sufficiently ventilated.
- Avoid contact with sharp objects to prevent damage to the spiral cable.
- Keep the appliance out of the reach of children and pets.
- Do not use the appliance if it is damaged or not working properly.
- Switch off the appliance before cleaning it or carrying out maintenance work.
- Only use accessories recommended by the manufacturer.
Manufacturer Contact information
Manufacturer Contact
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/