- Product description
- Charging programmes no. 5, 6, 7, 8, 9 and 10 can be set for all battery types
- Automatic, fast and gentle full charge and charge retention of the vehicle battery in accordance with DIN 14679
- Trouble-free operation and co-supply of devices connected to the vehicle electrical system (e.g. charging trays)
- Charging plug is automatically disconnected if the battery is missing (to prevent short circuits and plug corrosion)
- Visual and acoustic warning in the event of battery and operating errors
- Outstanding charging technology
- Fully automatic continuous operation for constant operational readiness of the batteries
- Compensation of voltage losses on the charging cables for exact compliance with the charging voltages
- Variable installation position
- Electronics protected against moisture
- The charging voltages are free of peaks and regulated to prevent overcharging
- Automatic battery regeneration during long downtimes (twice a week)
- Designed for direct connection of the charging plug at the end of the cable
(e.g. charging plug 12V/24V Art. 2331 or C-plug Art. 2323) - Cable length approx. 1.2m, extendable to approx. 5m
- Oil and acid-resistant cable suitable for high mechanical stress and use in damp rooms
Note: Automatic detection and switchover to 12V/24V vehicle electrical system voltage
Optional accessories:
- Remote control S (Art. 2075)
- Remote operating display IP67 (Art. 2081)
- Charger State Monitor (Art. 2082)
- C-plug (Art. 2323)
- Charging plug (Art. 2331)
Technical data
| Charging power in [V]/[A] | 12 and 24 / 16 |
| Nominal voltage (AC) in [V] | 230 |
| Operating voltage range (AC) in [V] | 190 - 265 (full charging capacity) |
| Power consumption (AC) in max. [W] | 290 (12V) / 530 (24V) |
| Sinusoidal power factor correction (CosPhi = 1) | yes |
| Nominal battery voltage (DC) in [V] | 12 / 24 |
| Battery capacity in [Ah] | 70 - 160 |
| Charging current in [A] | 16 |
| Auxiliary charging output "S" in [A] | - |
| Charging characteristic | IU1oU2 |
| Voltage limitation for all charging types/programmes [V] | 15 (12V) / 30 (24V) |
| Voltage ripple in [mV] rms | < 40 (12V) / < 50 (24V) |
| Number of charging outputs | 1 |
| Device installation position | any |
| Temperature range [°C] | -20 to +45 |
| Degree/class of protection | I / IP 21 |
| Dimensions (WxHxD) in [mm] - Dimensions incl. mounting flanges, without connections | 210 x 71 x 160 |
| Weight in [g] | 1400 |
| Standards (CE) | EN 60335-2-29 |
| Ambient conditions, humidity: max. 95% room humidity, non-condensing | |
| Scope of delivery: mains cable, spiral cable, operating instructions |
Safety instructions and warnings
Safety instructions for Votronic Automatic Charger VAC 1224-16 Station with spiral cable 5m:
- Please read the manufacturer's instructions carefully before using the device. - Ensure that the device is properly connected to a suitable power source. - Use the spiral cable supplied to connect the appliance to the power source. - Ensure that the spiral cable is not kinked or damaged to avoid electric shocks or other hazards. - Ensure that the device is sufficiently ventilated during the charging process to prevent overheating. - Avoid contact of the device with moisture or water, as this can lead to a short circuit. - Keep the device and the connections clean and free from dirt or other contaminants. - Keep the appliance out of the reach of children to prevent possible injury. - Do not carry out any repairs or modifications to the appliance unless this is expressly recommended in the manufacturer's instructions. - If problems or irregularities occur, please contact the manufacturer or authorised customer service. These were all the relevant safety and operating instructions for the product Votronic Automatic Charger VAC 1224-16 Station with spiral cable 5m. Please follow these instructions carefully to ensure safe use of the device.Manufacturer contact information
Contact Manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/