- Product description
Fully automatic charger (IP65) for charging, charge retention and maintenance
of genset batteries
- 6-stage charging characteristics for acid, gel and AGM batteries as well as lithium LiFePO4 batteries
- Fully automatic, monitoring-free charging (no 'boiling empty' of the battery)
- Battery capacities 6-100 Ah with charging currents adjustable from 1 A-4 A
- Switchable supply from the 12 V or 24 V vehicle electrical system
- Galvanic isolation through built-in isolating transformer
- Voltage isolation of the charging plug to prevent plug corrosion and short circuits
- Robust housing, protected against water and dirt thanks to protection class (IP65)
- Optionally available in a special version for FireCAN bus feed-through with M12 standard plug
Fully automatic DC charger in accordance with DIN 14679 for maintaining charge and recharging from the 12V or 24V vehicle electrical system (switchable) for the 12V starter battery of portable fire pumps (TS/PFPN), mobile generators and gensets. The adjustable charging current of 1 A to 4 A is designed for battery capacities of 6 to 100 Ah. Charging starts automatically as soon as the vehicle's on-board battery is charged while travelling or when connected to the mains. Four adjustable, 6-stage IU1oU2oU3 charging characteristics each for acid, gel and AGM1/AGM2 starter battery types as well as modern lithium LiFePO4 batteries ensure a fully-fledged and monitoring-free main, maintenance or gentle storage charge.
In the case of lead batteries, automatic battery regeneration and the switchable battery trainer keep the battery fit for longer periods of downtime. Input and output are galvanically isolated from each other. This prevents corrosion at the device plug-in unit (leakage currents) and a breakdown of the 24 V/12 V vehicle electrical system as well as compliance with the charging voltages and clean earth ratios. The charging plug is automatically de-energised after disconnection to prevent plug corrosion and short circuits. The device has a clear display of the battery status as well as a visual and acoustic alarm signal. An additional indicator light for "Charge OK" can be connected via a potential-free signalling contact. The robust housing protects against the effects of water and dirt (protection class IP 65).
Optional accessories:
- Spiral cable 2m, 2x 0.5 mm² 12/24VDC max. 4A (Art. 2317)
- MagCode Power-System-Set 12V (Art. 2326)
- MagCode Power-System-Set Pro 12V (Art. 2328)
- Charging plug according to DIN 14690 (Art. 2323)
Technical data
Output voltage | |
Voltage Start batteries lead / LiFePO4 | 12 V / 12.0 - 13.3 V |
Charging current adjustable / recommended battery capacity | 1, 2, 3, 4 A / 6 - 100 Ah |
Charging programmes lead-acid, gel, AGM / LiFePO4 | 4 / 4 |
Voltage cut-off charging plug / reverse polarity protection | yes / yes |
Connection for battery temperature compensation | yes / yes |
Input | |
Vehicle voltage switchable with discharge protection | 12 V / 24 V |
Automatic charge control from vehicle electrical system during | driving mode, mains charging |
Automatic cable compensation input / output | yes / yes |
Protection class | IP 65 |
Dimensions (WxDxH) in [mm] - Dimensions incl. mounting flanges, without connections | 120 x 58 x 80 |
weight | 270 g |
Test mark | CE / E-test (EMC/vehicle directive) |
Scope of delivery: Operating instructions |
Safety instructions and warnings
Safety instructions for Votronic TS-Battery Charger PFPN 1204:
- The Votronic TS-Battery Charger PFPN 1204 may only be installed and commissioned by authorised specialist personnel.
- The local safety regulations and VDE regulations must be observed before installing and commissioning the device.
- The device is only suitable for use in closed, dry rooms.
- The mains voltage must be checked before installing and commissioning the appliance.
- The device must not be installed near flammable materials.
- The Votronic TS-Battery Charger PFPN 1204 must not be immersed in water or other liquids.
- The device may only be operated with the mains plug included in the scope of delivery.
- The battery must be fully charged before connecting it to the Votronic TS-Battery Charger PFPN 1204.
- The device must not be opened or modified.
- The device must not be overloaded. Ensure that the maximum load of the device is not exceeded.
Manufacturer contact information
Manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/