- Product description
The LCD-Charge Control S is a convenient, easy-to-use control and operating element specially developed for the device combinations of the VBCS-/VAC-Triple series. It displays the status of the individual charging sources, the current charging phase, the voltage of the on-board and starter battery and the current charging current.
When the VBCS-Triple is in solar mode, the displays for the current solar power (W) and the energy counters (Wh and Ah, can be reset to "zero" at any time) are also available for your own statistical purposes. At the touch of a button, the mains charging mode of the VBCS Triple can be switched on or off manually or reduced in terms of power (AC power limit), e.g. if the shore power is insufficiently fused. A special protective function ensures that an inadvertently switched off mains charge is reactivated if the on-board battery is in danger of being deeply discharged.
The large, clear display has an illuminated and easy-to-read display with very low power consumption. Thanks to the plug and play connection, it can be easily retrofitted at any time, even at a later date.
retrofitted at any time and can be installed almost anywhere thanks to its compact design.
Note:The LCD Charge Control S (item no. 1247) is only compatible with theVBCS/VAC-Triple series.
Optional accessories:
- Surface-mounted housing for LCD display units (item no. 2024)
- Temperature sensor as 2nd external sensor for LCD thermometer / clock S (item no. 2001 or item no. 2085)
Technical Data
| Device type | Item No. | Nominal operating voltage (operating volt.) [V] | Current consumption [mA] | Current Lighting (can be switched off) max. [mA] | Measuring ranges | Dimensions (W x H x D) [mm] | Weight [g] |
| LCD-Charge Control S | 1247 | 12 / 24 (8 - 32) | 2 | 30 | - | 80 x 85 x 24 | 55 |
| Test mark: | CE, E-test (EMC/vehicle directive) | ||||||
| Scope of delivery: | Control cable 5m long, fixing screws, operating instructions, drilling template |
Safety instructions and warnings
Safety instructions for Votronic LCD-Charge Control S:
1. switch off the device and disconnect the mains plug before installing or servicing the Votronic LCD-Charge Control S.
2 Only use the device in dry and well-ventilated rooms.
3. do not use near water or other liquids.
4. do not allow the appliance to overheat. Ensure that there is sufficient air circulation.
5 Only use the power supply unit supplied to connect the Votronic LCD-Charge Control S to the power supply.
6. ensure that no metal objects get into the device.
7. keep the device out of the reach of children and pets.
8. if problems or malfunctions occur, contact the manufacturer or authorised customer service.
9. do not alter or modify the appliance without the manufacturer's authorisation.
Operating instructions for Votronic LCD-Charge Control S:
1. read the manufacturer's instructions carefully before using the Votronic LCD-Charge Control S for the first time.
2. observe the recommended settings and parameters for optimum operation of the device
3. regularly check the condition and cleanliness of the connections and cables.
4. keep the device away from strong magnetic fields to avoid interference.
5. regularly check the charging status and battery voltage to ensure optimum charging.
6. if changes are made to the charging system or the battery configuration, consult the manufacturer's instructions.
7. switch off the device and disconnect the mains plug if it is not going to be used for a long period of time.
8. keep all relevant documents and information on the Votronic LCD-Charge Control S in a safe place.
Manufacturer Contact information
Manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/