- Product description
The Solar Data Extender summarises the data from up to three solar controllers so that they can be shown on a single display. The familiar LCD display can still be used. It is compatible with the following devices
- Solar charge controllers in SR and MPP technology (from serial no. 14Vxx.xxxxx)
- Battery Charger type VBCS Triple
- LCD Solar Computer S (from serial no. 15V40.xxxxx)
- LCD Charge Control S
- VPC series with solar function
- Bluetooth Connector S-BC
Installation and connection
The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The signals are summarised and made available via the output (OUT). A solar display (e.g. LCD Solar Computer S) can be connected there.
It is connected between the Votronic solar charge controller and the solar display (e.g. LCD Solar Computer S) using the modular cable included in the scope of delivery. The IN1 connection must always be connected, as this is used to supply power to the device.
Technical data
| Nominal voltage (supply via connected devices) | 12 and 24 |
| Operating voltage range [V] | 8 - 32 |
| Current consumption in standby, typical [mA] | 0,7 |
| Current consumption during activity, typical [mA} | 10 |
| Dimensions (WxHxD) in [mm] | 75 x 47 x 24 |
| Weight in [g] | 37 |
| Test mark | CE, E-test (EMC/vehicle directive) |
| Ambient conditions, humidity: max. 95% room humidity, non-condensing | |
| Scope of delivery: 3 pcs. control cable 6-pin 0.5 m long, operating instructions |
Safety instructions and warnings
Safety instructions for Votronic Solar Data Extender 3n1
1. observe all applicable safety regulations and guidelines when handling the Votronic Solar Data Extender 3n1.
2. read the manufacturer's instructions and notes carefully before commissioning the product.
3. only use the product in accordance with the manufacturer's instructions.
4. ensure that the product is properly installed and connected to ensure safe operation.
5. ensure that the product is protected from moisture, heat, cold and other extreme environmental conditions.
6. switch off the product before carrying out maintenance work or repairs.
7. use only accessories and spare parts authorised by the manufacturer.
8. keep the product away from children and unauthorised persons.
9. do not overload the product and observe the technical specifications given.
10. in the event of malfunctions or damaged components, contact the manufacturer or authorised customer service.
Manufacturer contact information
Manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/