Votronic fresh water tank indicator S

The VOTRONIC tank gauges have been designed for accurate level measurement and can be used for all tank materials and tank sizes. They differ in the arrangement of the three-colour indicator light-emitting diodes at the range ends and in the symbol imprint on the front panel.

The fill levels of the tanks are displayed as clearly arranged light bars, each with 10 light-emitting diodes in three colours, which allows the exact recording of the tank fill levels at a glance. The displays work continuously, as intermediate levels are displayed with variable brightness, so that trends can also be recognised immediately. During refuelling and emptying of the tanks, the constantly rising or falling display provides the user with a direct image of the current fill level and thus enables complete control of the process. The continuous operation of the display also contributes to this. At the push of a button, the display can be switched on and off, or it switches off again automatically after approx. 10 minutes.

The display units are designed as a panel version to match the VOTRONIC modular system and fit in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of only 18 mm allow mounting in almost any location. The storage space behind can thus continue to be used.

The units are protected against incorrect polarity and overloading and are easy to connect via screw terminals on the rear of the unit. Installation and operating instructions as well as a drilling template for the furniture cut-out are included in the delivery. Like the transmitters, the indicators are also suitable for 12V and 24V operation.

Depending on the application and tank, one of the VOTRONIC tank level sensors can be used:

• Tank electrode 12-24 K
• Tank electrode 15-50 K
• Tank electrode 20 K-WC
• Tank sensor FL
• Tank sensor 30-110 K-FL

Notes:

• The indicators can also be assigned to 2 tanks each (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching over, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291.
• Previous transducers Tank Transducer Set and Tank Probe worked according to the conductive measuring method (conductivity) and are no longer suitable for continuous operation on the tank gauges due to the 7-step measurement.