- Product description
Battery temperature sensor with 3 m connection cable and suitable for M6 fixing bolts. Potted against
encapsulated against environmental influences. Suitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging
VCC converters and SR and MPP series solar controllers.
Safety instructions and warnings
Safety instructions for Votronic temperature sensor 625 (for M6 screw studs)
1) Before installing the sensor, ensure that the power supply to the device is switched off.
2 The sensor may only be installed and serviced by qualified personnel.
3. read the manufacturer's instructions and safety information carefully before installation.
4. ensure that the sensor is properly attached to the M6 bolts and that there are no loose parts.
5 Ensure that the sensor is protected from moisture, water and other liquids.
6. use the sensor only in the intended temperature range specified in the technical specifications.
7. take care when handling the sensor as it may have sharp edges.
8 In case of problems or uncertainties, contact the manufacturer or authorised specialists.
9. keep the sensor away from children and store it in a safe place.
10. regularly check the condition of the sensor and carry out any necessary maintenance work.
Manufacturer Contact information
Contact manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/