- Product description
- Media & Downloads
These tank sensors have been specially designed for measuring the level of water and water-containing media (fresh water, waste water, grey and process water, faeces) in metal or plastic tanks and can therefore be used universally. The measuring electrode can be easily shortened to the height of the tank and the exact "full" adjustment is made using an adjuster on the device, with the tank electrodes 12-24 K / 15-50 K and 20 K-WC also "dry" with the aid of a scale.
- Simple adjustment to the specified tank level
- Linear, stepless signal of the fill level
- Suitable for 12V and 24V continuous operation
Tank electrode 12-24 K:
- Rod electrode, easy to shorten to tank height
Accessories
Single switch 2xUM with flat plug connection (e.g. switch panel 16A S - Art. 1289 or switch panel 2x 16A S - Art. 1291), suitable for optionally operating a second tank on the same display (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.)
Technical data
| Device type | Type - No. | Operating Voltage [V] | Mounting on tank | Tank height |
| Tank electrode 12-24K1 | 5543 | 12 and 24 | Top/bottom | 12 - 24 |
| Test mark: | CE, E-test (EMC/vehicle directive) | |||
| Scope of delivery 1: | 2 sealing rings, union nut PG 29, operating instructions |
Safety instructions and warnings
Safety instructions for Votronic tank electrode 12-24 K (according to drinking water ordinance DIN 2001-2)
1 Please observe the following safety and operating instructions when handling the Votronic tank electrode 12-24 K:
- Read the manufacturer's instructions carefully before installing and commissioning the product.
- Ensure that the tank electrode is only installed by qualified specialist personnel.
- Ensure that the tank electrode is correctly connected to the drinking water system.
- Regularly check the condition of the tank electrode and carry out maintenance work if necessary.
- Only use the product in accordance with the manufacturer's instructions.
- Observe the applicable regulations and standards for the use of drinking water components.
- Keep the product away from moisture, heat, direct sunlight and other potential sources of danger.
- In the event of problems or irregularities with the tank electrode, please contact the manufacturer or qualified specialist personnel immediately.
2 Further information on safety and operating instructions can be found in the manufacturer's instructions and safety instructions. If necessary, also consult other valid sources.
Please note that this compilation of safety and operating instructions is based on reliable information. Nevertheless, you should always consult the manufacturer's current instructions and safety information.
Manufacturer contact information
Manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/