- Product description
These tank sensors have been specially designed for measuring the level of water and water-containing media (fresh water, waste water, grey and process water, faeces) in metal or plastic tanks and can therefore be used universally. The measuring electrode can be easily shortened to the height of the tank and the exact "full" adjustment is made by means of an adjuster on the device, with the tank electrodes 12-24 K / 15-50 K and 20 K-WC also "dry" with the aid of a scale.
- Simple adjustment to the specified tank level
- Linear, stepless signal of the fill level
- Suitable for 12V and 24V continuous operation
Tank electrode 20 K-WC:
- Rod electrode, easy to shorten to tank height
- Installation diameter 38 mm (or PG 29 thread)
- Flange diameter 46.5 mm
- Connection cable 75 cm longMounted from above using mounting ring
- Detachable plug connection for emptying the tank
Accessories
Single switch 2xUM with flat plug connection (e.g. switch panel 16A S - Art. 1289 or switch panel 2x 16A S - Art. 1291), suitable for optionally operating a second tank on the same display (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.)
Technical data
| Device type | Type - No. | Operating Voltage [V] | Mounting on tank | Tank height |
| Tank electrode 20 K-WC | 5555 | 12 and 24 | Top side | 12 - 24 |
| Test mark: | CE, E-test (EMC/vehicle directive) | |||
| Scope of delivery: | 2 sealing rings, mounting ring with fixing screws, plug and socket with locking mechanism, retaining clip, operating instructions |
Safety instructions and warnings
Safety instructions for Votronic tank electrode 20 K-WC
1. read the manufacturer's instructions and safety instructions carefully before commissioning the product.
2. ensure that the product is properly installed and connected to avoid potential hazards.
3 Only use the product in accordance with the manufacturer's specific instructions.
4. keep the product away from water and moisture to prevent short circuits or other electrical problems.
5. avoid contact with flammable materials to prevent fire hazard.
6. regularly check the condition of the product and, if necessary, carry out maintenance work in accordance with the manufacturer's recommendations.
7. keep the product away from children and pets to avoid injury.
8. disconnect the product from the power supply when not in use to prevent electric shocks.
9. if problems or uncertainties arise, contact the manufacturer or an authorised specialist.
10. observe all applicable safety regulations and guidelines when using the product.
Manufacturer contact information
Manufacturer
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/