- Product description
Loctite 648 is a special professional adhesive primarily intended for bonding various components, especially cylindrical components.
Typical applications of Loctite 648 are the fastening of gears or sprockets to shafts, the fastening of rotors to shafts and the like. The curing of the product takes place in a joint without air access, preferably between metal surfaces. The joint can be up to 0.15 mm wide.
After curing, Loctite 648 is highly resistant to vibration and impact, and the joint will not crack, loosen or leak. In addition to its high strength, the adhesive is also very heat-resistant, up to +180 °C.
Safety instructions and warnings
Safety instructions for LOCTITE® 648 - Joining adhesive high strength, low viscosity
Hazard warnings:
- Causes severe skin burns and eye damage.
- May cause allergic skin reactions.
- Toxic to aquatic organisms with long lasting effects.
- May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- May cause drowsiness and dizziness.
Precautionary statements:
- IF ON SKIN (or hair): Remove all contaminated clothing immediately. Wash skin with water/shower.
- IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
- Avoid release into the environment.
- Keep out of reach of children.
- Avoid inhalation of vapour/aerosol.
- Use only outdoors or in well-ventilated areas.
- Wear protective gloves/protective clothing/eye protection/face protection.
- IF SWALLOWED: Immediately call a poison centre/doctor.
- Keep container tightly closed.
- Dispose of contents/container to industrial incinerator.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html