- Product description
- Media & Downloads
Loctite SF 7200 - 400 ml is an excellent cleaner that is mainly used to remove old, hardened adhesives and seals. Simply apply the cleaner to the surface and leave it to work for as long as necessary.
The industrial cleaner is mainly used to treat surfaces for industrial processing. It is also suitable for removing old parts. Use the special cleaner Loctite SF 7200 - 400 ml to extend the life of the surface and the structural bond formed on the cleaned material, because the cleaner the bonding surface, the better the results.
Loctite SF 7200 - 400 ml degreases surfaces and removes dirt and small particles. It also removes metal shavings from processing, old seals and adhesives as well as dried oils and even colours. Apply the cleaner to the surface or to the seal, where it adheres thanks to the active foam and does not flow where it should not.
Technical data
Technical data:
- Type of application: Spray
- Type of cleaner: Parts/maintenance
- Areas of application: Metalworking industry, workshops, machines
- Materials cleaned: Gasket
- Brief description: Gasket remover that removes flat gasket materials in 10-15 minutes
- Packaging: 400ml
Safety instructions and warnings
Safety instructions for LOCTITE® SF 7200 - 400 ml adhesive and sealant remover
1. general safety instructions:
- Read all instructions and warnings carefully before use
- Use only in well ventilated areas
- Avoid eye contact
- In case of skin contact, wash off immediately with soap and water
- Keep away from children
2. storage and handling:
- Store product in the original packaging
- Protect from direct sunlight and heat
- Do not freeze
- Do not store or use together with oxidising materials
3. disposal:
- Follow local regulations for the disposal of chemical products
- Do not pour the product down the drain or into the sewerage system
- Empty containers can be rinsed before disposal
4. further information:
- Further safety and operating instructions can be found in the product instructions
- In case of emergency, contact the manufacturer or a doctor
- In the event of improper use or if symptoms occur, discontinue use immediately
Please note that this is only a summary of the safety and operating instructions. For detailed information, please consult the manufacturer's website or the product instructions.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html