- Product description
- Media & Downloads
The high-strength threadlocker Loctite 270 guarantees a permanent seal for threaded connections. After curing in the absence of air, it ensures the resistance of the connection, its strength and prevents loosening or leakage.
Loctite 270 threadlocker belongs to the so-called high-strength locking agents, which means that the connections cannot be easily disassembled after curing. Of course they can be disassembled, but this requires considerably more effort. This high-strength threadlocker hardens in the joint between two metal surfaces and prevents loosening or subsequent leakage.
Loctite 270 is also highly resistant to vibration and impact, which is particularly beneficial in active environments. The product also offers increased temperature resistance of up to 180 °C. So if you need maximum strength, Loctite 270 threadlocker is the right choice.
Technical Data
Technical data:
- Maximum thread size: M20
- Operating temperature: -55 to + 180°C
- Strength: high
- Release torque: 33 Nm
- Thixotropy: No
- Viscosity in mPa*s: 400-600
- Handling strength after, steel: 10 minutes
- Handling strength after, brass: 10 minutes
- Handling strength after, stainless steel: 150 minutes
- Comment: high strength, versatile
- Weight: 250ml/279g
Safety instructions and warnings
Safety instructions for LOCTITE® 270 - 250 ml high strength threadlocker
1 Read and understand all safety and operating instructions before use.
2 Wear appropriate personal protective equipment, including safety glasses and gloves, before use.
3 Do not inhale, ingest or allow product to come into contact with eyes or skin.
4. in case of skin contact, wash immediately with plenty of soap and water. In case of eye contact, rinse eyes immediately with plenty of water and seek medical advice.
5. if swallowed, do not induce vomiting, but seek medical advice immediately and show the label.
6. only store the container tightly closed and upright. Protect from direct sunlight and heat.
7. keep away from children and restrict access to the product.
8 Do not use the product near open flames or sparks.
9. use in well ventilated areas and avoid inhalation of vapours.
10. do not mix the product with other chemicals unless specifically recommended.
11. observe local regulations and laws when disposing of the product.
12. contact the manufacturer immediately in the event of improper handling or damage to the container.
Manufacturer contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html